Jual Kyoritsu KEW 6315 Power Quality Analyzer

Jual Kyoritsu KEW 6315 Power Quality Analyzer

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiW-qj5uExQRdXyG4VSqvXrfsGnnADmrN4jTNddmXkjVUXBCF76T9Knte-nmpfAmZtQwNM3q4QWW2EqovTn4jjFA-3pds99Wep2j69dmJOyXDXHp2bK5shGyiEXrpz3FeeaFkB2uMODa3g/s72-c/kyoritsu+kew+6315.jpg

Jual KYORITSU 6315 Power Quality Analyzer

Simultaneous Power & Power quality measurements

• Power/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)

Helpful support functions

• Quick Start Guide, Wiring check and Sensor detection for easy and reliable measurement

Measurement with high accuracy

• Guaranteed accuracy : ±0.3%rdg (energy),±0.2%rdg (voltage/ current)
• Complies with the International Standard IEC 61000-4-30 Class S and the European Standard EN50160

Remote monitoring on PC and Android device

• Remote checking of measurement in real-time is possible via Bluetooth communication.
• Recorded data can be saved in the supplied SD card.
• EN50160 report can be generated after survey by PC software.
• Various Clamp Current Sensors
• Various types of clamp and flexible sensors are available:
• from 1000mA Range up to 3000A Range and Earth leakage measurements

Energy consumption check on site

• Trend and demand graphs for easy recognition.
• TFT color display with high resolution.

IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V

Wiring connections	1P2W, 1P3W, 3P3W, 3P4W
Measurements and parameters	Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Active energy, Reactive energy, Apparent energy, Power factor (cos θ), Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate), Capacitance calculation for PF correction unit, Flicker
Voltage (RMS)
Range	600.0/1000V
Accuracy	±0.2%rdg±0.2f.s. (sine wave, 40 – 70Hz)
Allowable input	1 – 120% of each range (rms), 200% of each range (peak)
Display range	0.15 – 130% of each range
Crest factor	3 or less
Sampling speed of Voltage transient	24µs
Current (RMS)
Range	8128 (50A type) : 5/50A/AUTO 8127 (100A type) : 10/100A/AUTO 8126 (200A type) : 20/200A/AUTO 8125 (500A type) : 50/500A/AUTO 8124/8130 (1000A type) : 100/1000A/AUTO 8146/8147/8148 (10A type) : 1/10A/AUTO 8129 (3000A type) : 300/1000/3000A
Accuracy	±0.2%rdg±0.2%f.s. + accuracy of clamp sensor (sine wave, 40 – 70Hz)
Allowable input	1 – 110% of each range (rms), 200% of each range (peak)
Display range	0.15 – 130% of each range
Crest factor	3 or less
Active power
Accuracy	±0.3%rdg±0.2%f.s. + accuracy of clamp sensor (power factor 1, sine wave, 40 – 70Hz)
Influence of power factor	±1.0%rdg (reading at power factor 0.5 against power factor 1)
Frequency meter range	40 - 70Hz
Power supply (AC Line)	AC100 - 240V / 50 - 60Hz / 7VA max
Power supply (DC battery)	Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6 Battery life approx. 3h (LR6, Backlight OFF)
Internal memory	FLASH memory (4MB)
PC card interface	SD card (2GB)
PC communication interface	USB Ver2.0, Bluetooth Ver2.1 + EDR Class2
Display	320 × 240 (RGB) Pixel, 3.5inch color TFT display
Display update period	1 sec
Temperature and humidity range	23±5°C, less than 85% RH (without condensation)
Operating temperature and humidity range	0 - +45°C, less than 85% RH (without condensation)
Storage temperature and humidity range	-20 - +60°C, less than 85% RH (without condensation)
Applicable standards	IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V Pollution degree 2 IEC 61010-2-030, IEC 61010-031, IEC 61326, EN 50160 IEC 61000-4-30 Class S, IEC 61000-4-15, IEC 61000-4-7
Dimension	175(L) × 120(W) × 68(D) mm
Weight	Approx. 900g
Included accessories	7141B (Voltage test lead) 7170 (Power cord) 7219 (USB cable) 8326-02 (SD card 2GB) 9125 (Carrying case for KEW 6315) 9135 (Carrying case for KEW 6315-03) Input terminal plate × 6, KEW Windows for KEW 6315 (software), Quick manual, Alkaline size AA battery (LR6) × 6
Optional accessories	8124, 8125, 8126, 8127, 8128 (Load current clamp sensor) 8129, 8130 (Flexible clamp sensor) 8146, 8147, 8148 (Leakage and Load current clamp sensor) 8132 (Power supply adaptor) 9132 (Magnetic carrying case)

Related product you might see: